Follow the instructions on your own risk. I don’t take any responsibility on any damage, although this has worked perfectly for me and for many people.

You need 4 small pins like in the picture above which you can desolder from old motherboard.

Some tools, most important is soldering iron

Now open up your router. Attention, by doing this you will void the warranty!

Locate serial connector placeholder like on picture above.

Solder pins like above. The pinout description is right under placeholder.

Because router and your PC serial port has different logic levels you need a converter.

I used MAX232CPE based TTL – RS232 level converter from local market, it’s really cheap. You can see the picture of my converter below.

I’ve also successfully tested another converter based on MAX3232.

Now connect those pins to your converter. 4 pins need to be connected: RX, TX, VCC, GND. I’ve used black headers from old PC case.

The tricky part was that I knew I had to connect RX0 (router) to TX (converter) and TX0 (router) to RX (converter). But according to pinout marking on both router and converter I connected RX->RX, TX->TX in order to make it work.

Run SecureCRT or PuTTY. Port settings 115200 – 8 – N – 1.

The video below will show you the result in action.

Any question – ask.

Good luck!

Version 1.6.0 is released, click here for details!

vBProductMaker intended to help vBulletin product developers and make it easy to manage their products and corresponding components. The skill level of users using this tool can vary from novice to advanced web programmers. It is combining code editor with syntax coloring, vBulletin-aware management console and XML builder, in order to produce final XML file which can be imported into vBulletin. vBProductMaker is using internal file type in order to store and retrieve all information related to your vBulletin product. The file type is defined as .vbu . You can save your product as .vbu file and then later load it, modify and finally export to vBulletin XML product.

Features

• Indexing vBulletin script on local hard drive to help developer locating plugin hooks, template hooks, phrases, etc
• Show indexed vBulletin plugin/template hooks in editor
• Syntax coloring for PHP and Templates (HTML)
• Managing product details such us ID, title, description, version, product url, version check url and state
• Managing built in as well as custom phrase groups and phrases
• Managing product dependencies from php, mysql, related product and vBulleting versions
• Managing product install and uninstall codes
• Managing product tempates
• Managing product plugins
• Managing product options building for Admin CP
• Contains help file covering program as well as some vBulletin aspects in CHM format
• Exporting project to valid, well formed  XML file ready to publish

Changelog

v1.5.1 – Initial release (beta)

Todo

• Adding Cron functionality
• Importing XML vBulletin products
• More help topics

Requirements

Microsoft Windows with NET framework 2.0 or later

Download

Download vBProductMaker 1.5.1

Download vBProductMaker 1.5.1 [mirror]

As the help contains most of information one can need, I will show several screenshots from program help file below.

This is public beta version, feel free to test and report issues.

The script below will do the following

1. Create MySQL dump of your database using configuration set
2. Compress files and MySQL dump into single archive file and copy to destination folder
3. It will always create old backup so you always have previous version
4. Copy both old and new backups to network shared resourse

@ECHO OFF
 REM ----------- START OF CONFIGURATION HERE
 SET DESTINATION_FOLDER=c:\dest\
 SET BACKUP_FILENAME=yourBackup.rar
 SET BACKUP_FILENAME_OLD=yourBackup.old.rar
 SET BACKUP_DB_FILENAME=backup.sql
 SET MYSQL_FOLDER=C:\wamp\bin\mysql\mysql5.1.30\bin\
 SET MYSQL_DB_NAME=yourdbname
 SET MYSQL_DB_USER=yourdbuser
 SET MYSQL_DB_PASS=yourdbpass
 SET NETWORK_PATH=\\your_backup_pc_ip\path
 SET NETWORK_USERNAME=your_backup_pc_user
 SET NETWORK_PASSWORD=your_backup_pc_pass
 REM ----------- END OF CONFIGURATION HERE
 
CD %~dp0
 
%MYSQL_FOLDER%mysqldump.exe -u %MYSQL_DB_USER% -p%MYSQL_DB_PASS% %MYSQL_DB_NAME% >%BACKUP_DB_FILENAME%
 ECHO DB Done
 
rar a %BACKUP_FILENAME% @files.lst > NUL
 @del %DESTINATION_FOLDER%%BACKUP_FILENAME_OLD% 2>NUL
 @rename %DESTINATION_FOLDER%%BACKUP_FILENAME% %BACKUP_FILENAME_OLD% 2>NUL
 copy %BACKUP_FILENAME% %DESTINATION_FOLDER% > NUL
 ECHO Files Done
 
@del %BACKUP_FILENAME% 2>NUL
 @del %BACKUP_DB_FILENAME% 2>NUL
 ECHO Removing Temporary Files Done
 
ECHO Accessing Network...
 net use %NETWORK_PATH% %NETWORK_PASSWORD% /user:%NETWORK_USERNAME%
 copy %DESTINATION_FOLDER%%BACKUP_FILENAME% %NETWORK_PATH% > NUL
 copy %DESTINATION_FOLDER%%BACKUP_FILENAME_OLD% %NETWORK_PATH% > NUL
 ECHO Network Copy Done
 
ECHO All Done

To make backup regular I’ve used Cron NT service for Windows because I honestly don’t like Windows Scheduler and always disable it
Here is the crontab line that suits my needs.

This will backup my stuff every day at 23:10.

That’s pretty much it.
Cheers!

In my case I have injured Tibiocalcaneal ligament, hopefully just over stretched a little and not cut. There is no way at the moment to make sure without MRI, which is very expensive here. I’ll wait for the acupuncture treatment to finish and if still no help I should do something else…

Update: I have fully recovered my ankle, thanks everyone for asking!

The enclosure box I bought is below. The model NTY-M35HD. I bought it from South Korean local market online, through gmarket.co.kr.

The chipset used is JM20337.
Some PCB pictures of my enclosure.

And here goes recommended patch, click on the picture to see full size. Basically you have to remove resistor R15 4.72k.

Right after patch I have created a batch file for continuous reading / comparing over 2 days and not a single error.

So I want to thank Alex Lee for his great work and JMicron company for amazing products which I believe are leading in the market.

Cheers!

Then we had a lunch (with usual table and chair!!).

Then we went to learn coloring.

Credits for this pictures goes to my friend and his Canon camera.

]]> http://www.abeghyan.com/2008/12/08/mountain-sangnisan/feed/ 0 http://www.abeghyan.com/2008/12/08/tomato-brew-haus/ http://www.abeghyan.com/2008/12/08/tomato-brew-haus/#comments Mon, 08 Dec 2008 12:37:11 +0000 acid http://bigacid.wordpress.com/?p=18 Couple weeks ago me and my friends went to strange buffet/restaurant with even more strange name “Tomato brew haus”. Lot of beer, food, including numerous see foods. One can eath to death. A very nice place for birthday party and actully all kind of events and not that costly – about 18,000 KRW.
Will try to post some pictures whenever get a chance.

I recently moved to South Korea to work with Samsung. The city I live now and work has the biggest Samsung plant. However, there is not much here to have fun or spent time at all. Just a provincial city with about 300k population. The 3rd biggest city in SK Daegu is one hour far from me. Whenever I buy a car here I should go there once a week.

I need to learn Korean, nobody can speak English outside of the company, it is extremely difficult to communicate. Company provided for me Korean teacher, but it’s not helping a lot. Either I am lazy or learning Korean culture is more interesting than Korean language.

Girls are cute here though.

Koreans are very nice and friendly people, although they avoid communicating to foreigners. In some cases you may say that they are close minded. Their culture is adorable, so much respect and politeness to olders and parents. They never say no even if they have to. They bow to each other as greeting.

The food worth a separate post but since I’m on diet losing weight I better shortly describe. It’s SPICY. The national food is called gimchi, which is not main food, you can use it as an appetizer or salad. The rest is rice, soups, radish, seafood, meat on sticks and a lot of strange things I’ve never seen before.

By the way, so far I’ve lost 15kg since I came here, will keep losing.

That’s pretty much it for now.